Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

Sodium diffusion through amorphous silica surfaces: a molecular dynamics study

We have studied the diffusion inside the silica network of sodium atoms initially located outside the surfaces of an amorphous silica film. We have focused our attention on structural and dynamical quantities, and we have found that the local environment of the sodium atoms is close to the local environment of the sodium atoms inside bulk sodo-silicate glasses obtained by quench. This is in agreement with recent experimental results.     

Agglomération contrôlée de latex par formation de complexes tensioactifs anioniques : copolymères à blocs à base de poly(oxyde d’éthylène)

For polystyrene–poly(ethylene oxide) (PS–PEO) diblock copolymers, as micellar dispersions in aqueous medium, the formation of complexes with anionic surfactants, such as sodium dodecylsulfate (SDS) could be confirmed. The number of SDS molecules fixed per EO unit is close to the values reported for the SDS–PEO homopolymer interaction. Advantage of this type of complexation was taken to develop a controlled agglomeration process for SDS stabilized PS and PVC latexes by using as agglomerants ‘hairy’ latexes of PS and PVC that have been synthesized in the presence of PS–PEO block copolymers and that carry therefore a fringe of PEO sequences on their surface. The complexation of SDS by these surface-anchored PEO chains leads to the destabilization of the anionic latex, which has a tendency to precipitate onto the surface of the agglomerant latex. The average particle size and the size distribution of the agglomerated particles were studied as a function of the weight and number ratio of the two types of latexes involved in the agglomeration process, as well as in function of the surface coverage by SDS and PEO respectively. By adjusting these parameters, it was possible to obtain, with an efficiency of almost 100%, latex agglomerates with a monomodal distribution in the size range of 1 to 40 μm. An agglomeration mechanism could be outlined taking into account the complexation capacity and the specific surface of the agglomerating ‘hairy’ latex. To cite this article: P. Peter et al., C. R. Chimie 6 (2003).     

Gravity-induced convective flow in microfluidic systems: electrochemical characterization and application to enzyme-linked immunosorbent assay tests

A way of using gravity flow to induce a linear convection within a microfluidic system is presented. It is shown and mathematically supported that tilting a 1 cm long covered microchannel is enough to generate flow rates up to 1000 nL.min(-1), which represents a linear velocity of 2.4 mm.s(-1). This paper also presents a method to monitor the microfluidic events occurring in a covered microchannel when a difference of pressure is applied to force a solution to flow in said covered microchannel, thanks to electrodes inserted in the microfluidic device. Gravity-induced flow monitored electrochemically is applied to the performance of a parallel-microchannel enzyme-linked immunosorbent assay (ELISA) of the thyroid-stimulating hormone (TSH) with electrochemical detection. A simple method for generating and monitoring fluid flows is described, which can, for instance, be used for controlling parallel assays in microsystems.     

Synthesis, characterization and crystal structures of two polyphilic mesogenic compounds

Three homologous series of semi-perfluorinated liquid crystals: 4-(2,2,3,3,4,4,4-heptafluoro-butyloxycarbonyl)phenyl, 4-(2,2,3,3,4,4,5,5-octafluoropentyloxycarbonyl)phenyl and 4-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyloxycarbonyl)phenyl 4-[(n-perfluoroalkyl)alkyloxy]benzoates have been synthesized. Their mesomorphic properties were studied by DSC, microscopic observation and X-ray diffraction. Their layer spacings are smaller than the molecular length (L). The ratio d_SA/L is about 0.7. The crystal structure of two derivatives of the first family have also been investigated. In both structures the molecules pack in smectic C-like sheets where neighbouring molecules are antiparallel, interacting through dipolar and van der Waals forces. The interactions between contiguous sheets, through the ends of perfluorinated chains are very weak. The X-ray diffraction results on the mesophases and on the crystalline structures of two compounds of the first family are compared. From this, we propose a model of the smectic phases with a zig-zag structure.     

Measurement of long-range cross-correlation rates using a combination of single- and multiple-quantum NMR spectroscopy in one experiment

A method is described to determine long-range cross-correlations between the modulations of an anisotropic chemical shift (e.g., of a C' carbonyl carbon in a protein) and the fluctuations of a weak long-range dipolar interaction (e.g., in cross-correlation between the same C' carbonyl and the H(N) proton of the neighboring amide group). Such long-range correlations are difficult to measure because the corresponding long-range scalar couplings are so small that Redfield's secular approximation is often violated. The method, which combines features of single- and double-quantum NMR spectroscopy, allows one to cancel the effects of dominant short-range dipolar interactions (e.g., between the CSA of the amide nitrogen N and the dipolar coupling to its attached proton H(N)) and is designed so that the secular approximation is rescued even if the scalar coupling between the long-range dipolar coupling partners is very small. The cross-correlation rates thus determined in ubiquitin cover a wide range because of local motions and variations of the CSA tensors.     

Spontaneous dissolution of a single-wall carbon nanotube salt

Upon reduction with alkali metals, single-wall carbon nanotubes (SWNTS) are shown to form polyelectrolyte salts that are soluble in polar organic solvents without any sonication, use of surfactants, or functionalization whatsoever, thus forming true thermodynamically stable solutions of naked SWNTs.     

Conduction in charged PbSe nanocrystal films

Conduction in thin films of PbSe nanocrystals doped by electrochemical gating has been studied. Charging the film, with either electrons or holes, increases the conductance by orders of magnitude. The electrons in the 1S(e) state of nanocrystals in these films have a mobility as high as 5.0 x 10(-3) cm(2) V(-1) s(-1). Electrons in the 1P(e) state were found to have a differential mobility up to 3-5 times greater than the electrons in the 1S(e) state, and a mobility minima was found corresponding to the complete filling of the 1S(e) state. The temperature and electric field dependence of conductance in the film, measured between 4.3 and 135 K, were both well described by a variable range hopping model.     

The preparation of a cabbage reference material for environmental monitoring and food analysis

 Cabbage is frequently used in environmental monitoring and food control, and, hence, cabbage reference materials (RMs) are required for ensuring quality assurance. A cabbage RM was prepared in view of certification of specific elements from the "black list" of high toxicological interest and nutritive importance. All tasks of the RM production (production of the plant material, cutting and freeze-drying, determination of the residual water content, preparation of the RM, homogeneity testing, stability testing, certification measurements) are described in detail. Received: 12 November 1999 / Accepted: 29 January 2000     

An efficient and simple aminobenzannulation reaction: pyrrolidine as a trigger for the synthesis of 1-amino-acridines

[reaction: see text] A new aminobenzannulation methodology has been developed and applied successfully to the synthesis of 1-amino-acridines. The key and last step goes through an enamine intermediate that was detected in some cases. When pyrrolidine and powdered 4 A molecular sieves were used, the enamine synthesis and the aminobenzannulation step took place subsequently, whereas for other secondary amines, neutral Al(2)O(3) or PtCl(2) catalysis was necessary.